Electric Wiring is the most critical part of your residential living because spending a day without electricity is impossible. Your home appliances could not run without getting the required power supply. Proper wiring ensures you are never running out of power feed and that no wiring problem will make you suffer in the dark. With electric wiring having so much importance, it is your duty to take care of it and check its health and functioning regularly. However, it is not advisable to temper with wiring yourself. A licensed professional electrician should take it over as they can survey the entire building and electric system to provide you with holistic solution.
According to a survey, bad wiring can cause ample damages in terms of fire, money and deaths. Ignoring the existing quality of your house wiring can put your in more trouble than you think. Due to many misconceptions around electric wiring, homeowners believe they can solve the problem themselves. But they are not qualified to fix wiring issues. DIY projects in case of electric system can bring danger on you.
To make sure whether or not you need an expert electrician to correct bad wiring, you can refer to following common signs.
# Circuit breaker trips
Circuit breakers have successfully replaced archaic fuses in modern houses for sophisticated electric protection. They automatically cut the power supply when any fault occurs. If the tripping phenomenon occurs, you can reset it. But if it happens frequently, its capacity is probably compromised. This also suggests existing wiring fault and can lead to a dangerous situation if not repaired.
# Flickering lamps and dimming lights
In old times, when an appliance of heavy power wattage is turned on, homeowners would experience temporary flickering or dimness in lights. If the problem arises with more than just one lamp, it is not good. Regular flickering indicates there could be a serious wiring problem. You need a professional electrician to consult about whether or not your household needs an upgrade in electrical system.
# Lamp buzz and hiss
Modern electric appliances are getting sophisticated and deceive the homeowners about their actual functioning and interaction with power supply. If the lamp in your property buzzes as you turn on the appliance, it means there is a serious issue with electric system especially faulty or damaged wire. If this happens in different outlet, this is quite a serious situation that needs attention from qualified electrician.
# Dead outlet
Usually, electrical outlets are not expected to be hot when touched, or buzz or grow charred. If this is the ugly truth, you are facing the warning signs of bad wiring regarding that outlet. Dead outlet is surely the cause of loose or damaged wire especially when you have risked DIY operation. Always call a professional electric repairs expert to perform even the most minor operations.
# Old electric wiring
According to certain building codes, it is necessary to have wiring done to accurate standards by a licensed electrician. Old type of wiring is not bad or dangerous, but it should ensure safety and functionality to avoid grave hazards like fire or shock. Some older systems do not support 220 amps, which means use of multiple appliances on a single circuit may not be preferable. Due to out-of-date wiring, circuit breakers will trip frequently.
# Damaged or frayed wires
Wrong cable entanglement, frayed wires or roughly cut insulation pose the chances of extreme hazards of fire incidents. This might be due to the amateur job done to electric wiring. You need someone to take a look and review the whole wiring so that if there was any problem unnoticed, it could be resolved before dangerous situation ensues.
# Old Aluminum wiring
In previous century, aluminum wiring was preferred over copper wiring. Aluminum has the tendency to expand and contract upon catching the heat, which causes loose connections and increases the chances of fire hazards. So if your home is still wired using aluminum, it is a good idea to replace it with copper through a licensed electrician.
December 5, 2016
Leave a comment